← All projects

University of Pennsylvania · Apr 2026

MEMS Microphone

Piezoelectric device and readout design

This design study covers an AlN-based piezoelectric MEMS microphone, including the mechanical sensing element, electrical connections, readout circuitry and fabrication sequence.

Technologies: MEMS, AlN piezoelectric sensing, bimorph beams, electrode design, analog readout

Layer structure and electrical routing for the piezoelectric microphone concept.
Layer structure and electrical routing for the piezoelectric microphone concept.

Sensing beams and electrodes

Bimorph cantilevers use opposite strains across the beam surfaces to build a piezoelectric response. Electrode patterning supports the intended series connection between beams, increasing the available voltage sensitivity.

Exploded beam stack, electrode patterning and cross sections.
Exploded beam stack, electrode patterning and cross sections.

Readout circuit

The circuit converts the sensor response into a voltage signal, removes out-of-band components and amplifies the useful signal before conversion. The design targets sensitivity above 0.5 mV/Pa; this is a design specification rather than a fabricated-device measurement.

Readout, filtering and amplification circuit.
Readout, filtering and amplification circuit.

Fabrication planning

I specified the layer patterns and fabrication flow, including deposition, lithography, etching, electrode formation and release of the sensing structure.

Planned device-fabrication sequence.
Planned device-fabrication sequence.
© 2026 Yifan Ye
Built with Astrofy by Manuel Ernesto