← All projects

Electronic design project · Jul–Aug 2023

Ultrasonic Localization

Impact localization in solid media

This prototype detects where an impact occurs on an acrylic plate. PZT sensors at the plate edges capture the resulting acoustic response, allowing signal processing and learned features to estimate the impact region.

Technologies: PZT sensors, Raspberry Pi, Raspberry Pi Pico, Python, Keras/TensorFlow

Acrylic-plate impact-localization prototype with sensors mounted around the edges.
Acrylic-plate impact-localization prototype with sensors mounted around the edges.

Sensing and acquisition

I built the acquisition and control path around a Raspberry Pi and a Raspberry Pi Pico interface. The circuit connects the plate-mounted PZT sensors to the measurement system, while the prototype provides a repeatable surface for impact tests.

Controller and acquisition-interface schematic.
Controller and acquisition-interface schematic.

Two localization approaches

I implemented peak-detection preprocessing and compared geometry-based localization with a five-layer multilayer perceptron in Keras/TensorFlow. The geometric method uses the structure of the arrival signals, while the MLP learns features for impact-position classification.

Prototype display and sensing surface.
Prototype display and sensing surface.

Outcome

The project received a Second-Class Prize in the Guangdong Division of the TI Cup National Undergraduate Electronic Design Contest.

© 2026 Yifan Ye
Built with Astrofy by Manuel Ernesto